Tag Archives: Scotland

A Tale of a Tug

Improvement in Steam Vessels

(from a correspondent)

One of the greatest applications of Steam Vessels, has lately been made in Scotland, and, we learn, with the most complete success. It appears that since the opening of the Forth and Clyde Canal (upwards of 30 years ago) a navigable communication has existed between Glasgow and Leith, the port of Edinburgh, notwithstanding which, by far the greatest portion of the trade between these places, has been carried on by land carriage, an an expense more than double what it might have been done by water.

This navigable communication consists of a Canal, for 29 miles, and a broad River or Firth for 26 miles; and it appears, that the obstacle which has prevented the benefit being taken of such apparent advantages, is the extreme difficulty of constructing vessels, which from draught of water and mode of rigging, would answer for the navigation of the Canal, and at the same time be able to contend against strong and contrary winds in the Firth of Forth.

To obviate this difficulty, a Company in Leith, have equipped a powerful steam vessel, or tracker, possessing extraordinary strength, and completely adapted for encountering stormy weather. This vessel, which is most appropriately named the Tug, is meant to track ten other vessels alternately, which have been peculiarly constructed by the same Company for carrying goods along the Canal.

The Tug, which may thus be compared to a team of horses in the water, tracks these vessele between Leith and Grangemouth, the entrance of the Canal, along which they are tracked by horses. But the utility of the Tug is not confined to tracking; she has also two commodious cabins, and combining the two purposes of tracking and conveyance of passengers, she is able to convey the latter with a degree of cheapness, which resembles more the track schuyt of Holland, than any conveyance we have in this country; the passage in the best cabin, being for a distance of 26 miles, two shillings, and in the second, one shilling.

For this most ingenious application of steam to this conveyance, we understand the public are indebted to Lieut George Crichton RN, Edinburgh, an officer who has long been distinguished for scientific knowledge in his profession.

It has long been known that a steam vessel will tow a ship out of harbour, in calm weather, or with light contrary winds, but her velocity was generally considered so much obstructed by the operation, that no idea appears to have been formed that an expeditious conveyance could be so established; but Lieut Crichton, it seems, had calculated on the peculiar manner in which a steam vessel is impelled, and by which any increased resistance to her motion through the water enables her wheels or paddles to act with more effect in proportion, and had estimated that in drawing a vessel of half her own size, she would not lose more than a fifth of her velocity. The Tug draws a loaded vessel of 50 tons, against a moderate breeze of wind, at the rate of nearly seven miles an hour.

The improvements which this invention may lead to in the river navigation of this country are incalculable; for by thus uniting the conveyance of passengers and goods, steam vessels will probably be established between points, which, [illegible] only one of these objects, would not have found sufficient employment.

We understand that Colonel [illegible] of Edinburgh, Kirkman Finley Esq MP for Glasgow, and several other Gentlemen of high respectability, are at the head of a Company, which have with much promptitude and [illegible] carried into effect the plan proposed by Lieut Crichton.

Perthshire Courier 23 October 1817

A new book

Andy Wood’s Abandoned & Vanished Canals of Ireland, Scotland and Wales [Amberley Publishing, Stroud 2015] is now available. It is a companion to his Abandoned & Vanished Canals of England.

Many (but by no means all) of the Irish canals are covered on this site; the author sought and was granted permission to draw on this material and has generously acknowledged that.

I have not yet had time to read the book but I did note that the author seems to have confused Grand Canal Harbour and Grand Canal Docks.

What happened to the Wingate?

On 22 September 1870 the Irish Times said that the owner of the new steam launch Wingate was

 willing, in case of six or eight gentlemen joining, to defray the expenses of making a cruise through the Grand Canal, down the Shannon to Limerick, and then up the river to its source.

The notice said that the launch would steam through Loughs Allen, Kay [now Key], Dee and Derg. I don’t know where Lough Dee is: perhaps it’s a typo (or printo) for Ree. There would be a side-trip to Lough Gill, taking the Lady of the Lake steamer to Sligo, and the launch would then take the Leitrim Canal (now the Shannon–Erne Waterway) to the Erne, covering the whole of it from Belturbet to Belleek.

After that, the Wingate would travel by the Ulster Canal to Lough Neagh and Coleraine, returning “either by Newry or the Royal Canal” to Dublin. It is not clear how the Royal Canal (which links Dublin to the Shannon) could form part of a route from Lough Neagh to Dublin.

Whoever wrote the notice suggested that the cruise would take ten days, which suggests a degree of optimism not consonant with a knowledge of the distances involved.

An ad appeared in the next day’s paper, offering for sale the Wingate, a composite steam screw launch lying at Kingstown (Dun Laoghaire), and saying that a cruise of 10–12 days, only as far as Lough Erne, could be arranged pending sale.

According to the invaluable Clydebuilt database, a launch called Wingate was built by T Wingate & Company of Glasgow in an unspecified year. But why was a new launch being offered for sale?

Richard Heaton’s genealogy website includes a collection of newspapers, and one of them, the Supplement to the Warder for 3 [not 31] September 1870, has an account of how the Wingate reached Dublin (Kingstown) from Scotland, where the owner had failed to find half a dozen hardy souls willing to accompany him on a tour of the Western Isles and the Highlands. This is scarcely surprising as the Wingate was an open launch only 35 feet long.

So who owned the Wingate? Did the owner manage to reach the Irish inland waterways, or was he forced to sell his launch? I would welcome more information.

Shotts wha hae …

On my page about Shannon cranes I showed part of the remains of a crane at Kilgarvan on Lough Derg (it’s a little over half way down the page). I said:

Unfortunately I can’t read the first line […].

I have since had another go, and I think that the first line says

Shotts Iron Works

There was an iron works at Shotts from 1802. The town is in North Lanarkshire, about half way between Edinburgh and Glasgow.

If, gentle reader, you can supply any information about cranes manufactured at Shotts, do please leave a Comment.